속도가 현저히 떨어져서 보드패치를 하라고..전에 질문했는데 답변에 그러시드라구요... 그래서 할려고...산드라인가? 그걸로 메인보드 정보를 봤는데 이렇게 나옵니다... 메뉴얼(컴터샀을때 준거..)에는 p6-bxt a+ 인가? 이고...정보를 보면
SiSoftware Sandra
Computer System
Manufacturer : System Integrator
Model : Intel 440BX
Version : 01
Serial Number : 886288661088
System Mainboard
Manufacturer : EliteGroup Computer Systems Co. Ltd.
MP Support : No
Model : i440BX-W977EF
Version : 1.0
Serial Number : 886288661088
BIOS ID : 03/24/1999-i440BX-W977EF-P6BXT-APC-00
Memory Controller
Error Detection Method : 8-bit parity
Error Correction Capability : None
Supported/Current Memory Interleave : 1-way / 1-way
Number of Memory Slots : 3
Maximum Installable Memory : 96MB
Maximum Module Size : 32MB
Supported STD/FPM/EDO Speeds : 70ns, 60ns
Supported SDRAM Speeds : PC66, PC100
Supported Memory Types : EDO, SDRAM
Supported Memory Voltages : 3.3V
Physical/BIOS Memory Banks
DIMM1 (RASL-0 RASL-1) : 128MB DIMM SDRAM single-bank
DIMM2 : Empty
DIMM3 : Empty
System Chipset
Model : Unknown (8086) Unknown (7190)
Bus(es) : ISA AGP USB SMBus/i2c
Front Side Bus Speed : 1x 100MHz (100MHz data rate)
Max FSB Speed / Max Memory Speed : 1x 100MHz / 1x 100MHz
In Order Queue Depth : 4 req(s)
Logical/Chipset Memory Banks
Bank 0 Setting : 64MB SDRAM 8-1-1-1R 6-1-1-1W 3-3-3CL
Bank 1 Setting : 64MB SDRAM 8-1-1-1R 6-1-1-1W 3-3-3CL
Speed : 1x 100MHz (100MHz data rate)
Multiplier : 1/1x
Refresh Rate : 15.60탎
Power Down Mode : No
Fixed Hole Present : No
Memory Module(s)
Memory Module 1 : KMM3 66S1623DT -GL 1FE60C00 128MB 16x(8Mx8) SDRAM PC100-322-622 (CL3 upto 100MHz) (CL2 upto 83MHz)
Environment Monitor 1
Model : Genesys GL520SM SMB
Version : 8.00
Mainboard Specific Support : No
Temperature Sensor(s)
CPU Temperature : 47.0캜 / 116.6캟 td
Power / Aux Temperature : 47.0캜 / 116.6캟 td
Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 4247rpm
Voltage Sensor(s)
CPU Core Voltage : 2.13V
+3.3V Voltage : 3.19V
+5V Voltage : 4.90V
+12V Voltage : 12.42V
AGP Bus
Version : 1.00
Speed : 67MHz
Current Data Transfer Rate : 2x 67MHz (134MHz data rate)
Side Band Enabled : Yes
Aperture Size : 64MB
LPC Hub Controller 1
Model : Unknown (8086) Unknown (7110)
ACPI PM Enabled : Yes
Random Number Generator Enabled : No
Multiplier : 1/4x
Speed : 8MHz
DMA Multiplier : 1/2x
DMA Speed : 4MHz
USB Controller 1
Model : Unknown (8086) Unknown (7112)
Version : 1.10
UHCI Interface : Yes
Channels : 2
Speed : 48MHz
Legacy Emulation Enabled : No
System SMBus Controller 1
Model : Intel PIIX4 SMBus / compatible
Speed : 16kHz
Expansion Slot(s)
ISA : ISA 16-bit 5V FullLength
ISA : ISA 16-bit 5V FullLength
PCI (9h) : PCI 32-bit 5V FullLength Available
PCI (Ah) : PCI 32-bit 5V FullLength InUse (Unknown (10EC) Unknown (8029))
PCI (Bh) : PCI 32-bit 5V FullLength Available
PCI (Ch) : PCI 32-bit 5V FullLength Available
PCI (Dh) : PCI 32-bit 5V FullLength InUse (Unknown (13F6) Unknown (0100))
AGP : AGP-2x 32-bit 3.3V FullLength Available
Port Connector(s)
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO Compatible - Floppy / None
COM1 : Serial Port 16450 Compatible - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 Compatible - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB25 pin female / DB25 pin female
Keyboard : Keyboard Port - None / PS/2
PS/2 Mouse - Detected : Mouse Port - PS/2 / PS/2
USB : USB - None / None
Performance Tips
Notice 224 : Tip not found!
Tip 2511 : Tip not found!
Tip 2524 : Tip not found!
Tip 2 : Tip not found!
이렇게 나옵니다...
보드패치를 해야 하는데 자료실에서 무슨 파일을 다운 받아 해야 할까요...
컴맹이라 쉽게 손도 못대고 있습니다...
알려주세요오~~
