전 XP 홈을 쓰고 있구요...
AMD 1800+
지포스2 mx400 64m를 쓰고 있습니다..
시도 때도 없이 다운이 되길래 별짓을 다해봤습니다..
아래와 같은 메세지가 뜨길래 그래픽 카드를 빼서 잘 닦고 다시 끼우고 드라이버도 삭제하고 다시 삭제 했습니다..
아래는 예전 내용입니다.
참고..
A problem has been detected and windows has been
shut down to prevent damage
to your computoer.
If this is the first time you`ve Seen this stop error screen,
restart your computer.If this screen appears again,follow
these steps:
Check to be sure you have adequate disk space.If a driver is
identified in the Stop message,disable the driver or check
with the manufacturer for driver updates.Try changing video
adapters.
Check with your hardware vendor for any BIOS updates,Disable
BIOS memory options such as caching or shadowing.If you need
to use Safe Mode to remove press F8 to select Advanced Startup Options,and then
select Safe Mode.
Technical information:
***STOP : 0x0000008EC0xC0000005,0x13F9A05EF,
0xF2DFD36C,0x00000000)
***nv4 _ disp.dll - Address BF9A05EF base at BF99E000,DateStamp 3eb2f82b
Beginning dump of physical memory phtsical memory domp complete.
Contact your system administrator or technicalsupport group for further
assisthance.
그런데 이제는 다운 되면서 다른 메세지가 뜨네요..
이 내용을 보시고 해결해 주실 수 있는 분 자세한 답변 좀 부탁드리겠습니다..
하루에도 몇번씩 시도 때도 없이 다운되네요...
정말 포맷말고는 방법이 없을까요?
아래는 오늘부터 새로 뜨기시작한 블루 스크린의 내용입니다.
A Problem has been detected and windows has been shut down to prevent damage
to your computer.
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you`ve seen this Stop error screen,
restart your computer.If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation,ask your hardware or software manufacturer
for any windows updates you might need.
If problems continue,disable or remove any newly installed hardware
or software.Disable BIOS memory options such as caching or shadowing.
If you need to use Safe Mode to remove or disable components,restart
your computor,press F8 to select Advanced Startup options,and then select Safe Mode.
Technical information:
***STOP : 0x000000D1C0xFFFFFFFF,0x00000006,0x00000000,0xFFFFFFFF)
Beginning dump of physical memory
physical memory dump complete.
Contact your system administrator or technical support group for further
assistance.
