흠...이거 속도제한에 있는 모뎀정보 보는 프로그램으로 본건데요
이것이 그 속도제한 알아보는 프로그램 맞나요?
DocsDiag v020714 Copyright 2001-2 Robin Walker rdhw@cam.ac.uk
NET&SYS DOCSIS Cable Modem MNG2005
System up time = 1 days 01h 11m 35.00s
MAC address.1 = 0002001793C2
MAC address.2 = 0002001793C2
MAC address.5 = 0002001793C2
IP address.10.167.176.68 = 10.167.176.68
IP address.127.0.0.1 = 127.0.0.1
Ethernet single-collision errs.1 = 342331
Ethernet multiple-collision errs.1 = 136590
Ethernet deferred xmits.1 = 26474
Ethernet other xmit errors.1 = 623652
Ethernet carrier sense xmit errs.1 = 27
Ethernet other recv errors.1 = 461
Downstream channel ID = 3
Downstream channel frequency = 489000000 Hz
Downstream received signal power = 17.6 dBmV
Upstream channel ID = 3
Upstream channel frequency = 34000000 Hz
Upstream timing offset = 13286 units of (6.25/64) microseconds
QoS max upstream bandwidth = 800000 bps
QoS max downstream bandwidth = 10000000 bps
SigQu: received without error = 2864314599 codewords
SigQu: correctable errors = 0 codewords
SigQu: uncorrectable errors = 0 codewords
SigQu: Signal to Noise Ratio = 36.3 dB
SigQu: microreflections = 30 dBc
Cable modem status = Operational
Upstream transmit signal power = 37.2 dBmV
Number of interface resets = 1
Downstream sync losses = 0
Invalid MAP msgs received = 0
Invalid UCD msgs received = 0
Invalid Ranging Responses rcvd = 0
Invalid Registration Resps rcvd = 0
T1 timer expiries = 0
T2 timer expiries = 0
T3 timer expiries = 19
T4 timer expiries = 0
Ranging Aborts = 0
Tx mini-slots used (contended).4711 = 0
Tx mini-slots used (dedicated).4711 = 110164172
Tx data re-tries.4711 = 0
Tx data retry limit exceeded.4711 = 0
Tx bandwidth req retries.4711 = 204834
Tx bw req retry lim exceeded.4711 = 0
Date and Time = 2003-07-22,01:40:25.0
Configuration filename = cm.cfg
