System up time = 0 days 01h 00m 38.08s
MAC address.1 = 0030EB352C45
MAC address.2 = 0030EB352C45
IP address.10.132.0.17 = 10.132.0.17
IP address.192.168.100.1 = 192.168.100.1
Ethernet single-collision errs.1 = 115
Ethernet multiple-collision errs.1 = 136
Ethernet carrier sense xmit errs.1 = 41
Downstream channel ID = 3
Downstream channel frequency = 495000000 Hz
Downstream received signal power = 0.0 dBmV (or not supported)
Upstream channel ID = 1
Upstream channel frequency = 30000000 Hz
Upstream timing offset = 12782 units of (6.25/64) microseconds
QoS max upstream bandwidth = 512000 bps
QoS max downstream bandwidth = 10000000 bps
SigQu: received without error = 114913869 codewords
SigQu: correctable errors = 0 codewords
SigQu: uncorrectable errors = 0 codewords
SigQu: Signal to Noise Ratio = 35.3 dB
SigQu: microreflections = 16 dBc
Cable modem status = Operational
Upstream transmit signal power = 42.0 dBmV
Number of interface resets = 1
Downstream sync losses = 0
Invalid MAP msgs received = 0
Invalid UCD msgs received = 0
Invalid Ranging Responses rcvd = 0
Invalid Registration Resps rcvd = 0
T1 timer expiries = 0
T2 timer expiries = 0
T3 timer expiries = 4
T4 timer expiries = 0
Ranging Aborts = 0
Tx mini-slots used (contended).319 = 0
Tx mini-slots used (dedicated).319 = 138351
Tx data re-tries.319 = 0
Tx data retry limit exceeded.319 = 0
Tx bandwidth req retries.319 = 3291
Tx bw req retry lim exceeded.319 = 0
Date and Time = 2002-12-28,15:49:52.0+00:00
Configuration filename = cm.cfg
이런 정보가 나왔습니다..;;
사용 모뎀은 인텍 사용하고 있고요
스텝1에선 ip 를 192.168.100.2 로 해야 파일이 받아 지던데 ;;
이렇게 되면.. 나중에 게이트웨이에 적어야 하는 제 모뎀 ip는 위 3개중 어떤게되죠 ;;;
아.. 그리구요.. 정확이
ip 에는 dhcp ip를
서브넷마스크는 알아서;;;
게이트웨이는 모뎀 IP 가 맞나요?
